A variety of user created mappings for Automap control of plug-in instruments and FX:
There is a problem with the x-fader. It does not completely fade from deck2 to deck1. It´s a Mixvibes issue, not a hardware fault.
Usable for manual improvements, because Automap feature is brocken for this!
Automap setup for RP-Verb Made On SL MKII
I mapped most of the Logic devices to the Nocturn.
Some mapping are very simple (just renamed parameters), others show are new templates and some show a different approach compared to those that were available on the Novation website.
Map for Acustica Audio Nebula3 and Nebula3 PRO.
This is a 64channel mixer automap file for the Nuendo 4 software - PC 32 bit - any suggestion - feel free - firstname.lastname@example.org
The most needed Parameters (also deeper Parameters) compact on 6 pages. Logical and ergonomic layout. All well descibed. No hyrogliphes parameter description. Pages are named as well with dummy parameters (no function)for easy orientation in the pages...
Contains mappings for
Short Cut Commands
An in depth sound design based template for MOTU's MX4
17 pages - all controls mapped to my best knowledge.
Pages: Filter + Main, OSC A1, OSC A2, OSC B1, OSC B2, ModEnv 1+2, LFO 1+2, Misc 1A+1B+2A+2B, Arp on 2 pages, Dist, Phaser, Chorus, EQ, Delay, Reverb, Comp.
All 4 OSC pages feature ADSR and Mix A/B/Main on the faders, Part A/B and Solo switches below the faders.
All 17 pages feature all 8 FX on/off switches on the top of the transport buttons for quick access.
All FX Dry/Wet controls (where available) mapped to the 8th fader.
This kit consist two files *.maping for automap and *.tks for traktor. I made it by myself. Hope you enjoy
Common performance variables mapped to knobs. More static variables mapped to pots.
This is my attempt to control the bass beast from Spectrasonics.
I focused on performance controls and easy editing.
Spec. tools have no predefined CC IDs, so I included this file too.
You need to load this for every part you want to control.
Page 1 : Main page performance from left to right plus the 4 lower controls on buttons
Page 2 : Filter control and AMP envelope
Page 3 : Filter envelope and 1st Mod. envelope
Page 4 : LFO 1-4 , rate, depth, sync and +
I know its just a start but please try it and give some feedback.
Guru 1.6 Remote Zero SL.Hope u like it))
This has both coarse (on a fader) and fine (on an encoder) control of depth.
1 zipped file for Twisted Tools - Vortex - Reaktor ensemble. This 7-pages Automap was created with Remote Zero SL and works only in VST mode / not as standalone in Reaktor. Have fun with it! Greetz
The four Dimension Pro Elements are mapped to pages 1-4 roughly in the order they appear in the plug-in. Most knobs and buttons are mapped plus course and fine tune. However, the zones and modulators are not mapped.
The mixer mappings are on page 5 encoders = fx sends,
pots = pan and volume and
faders = the elements fx input and wet/dry mix.
Page 6 is mapped to the mod fx and reverb.
If there is any zipper noise from the encoders, eg. cut off in an Element , try increasing the Max: from 256. This reduces the step size but increases the amount of encoder turning.
Page1 - Basics
Page2 - Filter LFO1
Page3 - LFO2 Env´s
Page4 - TripleVCO
Page5 - DualVCO
Page6 - DCO
Page7 - DualVCO Eco
Page8-11 - FX
enjoy this incredible instrument and support UHE...!!!
JBM 61H is a plugin that aims to mimic the way PC speakers sounded and was programmed in games to produce all sorts of cold hard noises.
This automap is constructed so that each parameter is mapped twice on both the left and the right knob groups. The slider is mapped to one parameter on the previous page. The left knob group tweaks the parameters with a fast approach, the right side is used for fine adjustments of the parameters.
This is just a simple mapping for 2 decks in Torq 2.0 unfortunately Torq doesn't support led feedback but the mapping is simple to remember once you have used it 2 times. It also allows you to trigger the 4 effects in each deck and the kill switches on the mixer for hi med lo. Enjoy it and once I have figgered out a better update I will let all of you know.
LA2A, 1176LN, Space Echo, Plate 140, EMT 250, Helios 69 and many more!
Redline Equalizer Automap made with Cubase and a Novation SL MKI.
72 Ch. mixermap for Cubase or Nuendo.
All 72 ch. have separete potis for vol, pan and send. All 72 ch. have separete button for solo, mute and record.
Hope your work will be faster...
greetz Jay Hyme
just 3 pages for basic controls:
1 - easy morph, Arp, FX on/off
2+3 - FX
This is a straight forward Nocturn map for the Bass Station plugin, assigning most parameters from left to right as you see the plugin. Pay attention to the buttons as well, some are redundant, but might work better than knobs in certain situations. It is divided into 5 pages, with the last being the setup page, in case you want to tweak expressive control from your keyboard controller.
Complete mapping of the LennarDigital Sylenth1 synthesizer. Including the effects section and arpeggiator. Made for the ReMOTE ZeRO SL MK1.
this is a selfmade mapping that suits my needs when dj´ing with traktor SCRATCH pro (not traktor pro).
hope it works for u.
I mapped the most important parameters of this synth across various pages.
Automap for FabFilter Pro-Q VST/RTAS plug-in.
Made for Nocturn users.
Page 1 - EQ Gain and Frequencies Low to Hi, Left to Right
Page 2 - Lo/Hi Pass Filters(2x) and Mid Band Qs
Page 3 - Dynamics
All Pages - Fader controls gain
All documented cc parameters of the monster mapped in a logical order from OSC to LFO to Filter, Envelopes to the Mixer. You can easy navigate through the pages, they're all named and you now always where you are. have fun
Ratshack Reverb 2
iPhone Cubase Short cuts
An in depth sound design based template for Linplugs Alpha 3