A variety of user created mappings for Automap control of plug-in instruments and FX:
Logic's Tape Delay all in one page
The script and template give you control over:
The first 8 parameters of an Ableton device or a VST (you shouldn't need this for VSTs as that's what Automap Universal is for but it's an option) as well as bank changing (next, previous and 1-8) and locking to a device
The first 8 volumes
The first 8 sends of Send A and Send B
The first 8 track arm buttons
16 pads on a drum rack (I have found that the Remote SL also sends default notes so 8 rogue notes will be triggered while playing these pads, I don't know if there is a way of disabling it. A solution is to just leave these notes blank in the drum rack.)
Transport Controls, play, stop, forward, rewind, record and loop
I have also midi mapped a few features including, loop punch in and out, overdub, metronome, back to arrangement, follow, tempo/tap as well as nudge up and down, and quantization, scene launch, stop clips and scene select, master volume, headphone cue, master pan
Finally as I used Automap Pro for this template I incorporated some key commands to cover:
Up, down, left, right, arrangement/session view change, waveform/device view change, cut, copy, paste, duplicate, split and consolidate
Template for Native Instruments "SpaceMaster2" / Reaktor 5 Library Ensemble.
Maps the XY pads of the zebra 2 synth to the nocturns 8 buttons.
A very good EQ and its free !
Made a quick mapping for it...
An in depth sound design based template for Alphakanal's Automat (Great Must Have Freeware)
download corresponding Omnisphere Midi Mapping + Maschine Template under MIDI Templates...
PAGE1: Vol 1-8, Aux1 , Aux3, Solo, Mute
PAGE2: Orb Controls
PAGE3: Filter Cut/Res, Filter On/Off, Master Filter
Page4: some Control for Channel1 LayerA
Page5: Some Controls for Channel1 LayerB
Mapping doesn´t make sense without the Maschine Template and of course the Omnisphere
File, downloadable in Midi-Template Section
Preset for the UAD RE201 Roland Space Echo
Majority of controls organized vertically using the left side of the controller.
A three page setup for Nexus 2. First Page : Performance controls
Second Page : Filter and Amp Env
Third Page : Delay and Reverb
Due to the lack of automation capabilities of Nexus, nothing for the buttons or the LCD controls.
An alternative mapping...
PG-23P is an emulation of the Roland JX-3P from the PG-200 programmer's interface. It was developed using a physical JX-3P and available specifications in order to match all routing, depth, tuning, and value ranges as closely as possible. It has all the characteristics and features of the JX-3P
Made using the vst version with vstau in Logic.
Maps almost any parameter of NI Pro53 to SL MKII
Here an automap created with Traktor Pro. Great alternative to use Remote Zero SL as DJ. This 2 pages automap support 4 decks with whole effects and EQs. Have fun Cheers
Load also the mapping in Geist, uncheck launchpad midi and check automap midi.
all Functions of Philta XL on 2 Pages
the Lo & Hi Cutoff Frequencies are mapped Twice
on the First two Faders For Quick Control
and on the First 2 Encoders For more Precise control
Automapfile for Reason's NNXT. allows several options to work with zones like: chromatic automap, group... etc
Single page mapping for the free s(M)exoscope waveform visualization plugin by Bram from Smartelectronix. Made for the ReMOTE ZeRO SL MK1.
Use Nocturn to control mixer, transport, devices, scenes, clips, master, tempo, etc. It includes python scripts that communicate with Live 8. You don't need to map manually any parameter. Under GPL license. Revision 2 adds various improvements (see revisions.txt and readme.txt). See also: https://forum.ableton.com/viewtopic.php?f=1&t=122831
AxxII Arp Axxe Emulator
2 Deck bidirectional config (fx+transport+mixer).
You will need:
1. Traktor Pro
4. Bome Midi Translator
In zip file you will see:
1. Routing scheme beetwen Traktor-Automap-Bome (you need to set up this exactly like in scheme.jpg)
2. Map settings for Bome
3. Map settings for Traktor
4. Automap settings for Nocturn
This is complex but VERY flexible configuration, so if someone will need this - contact me.
This is my first Automap3 automap for this great Freeware Synth.
It includes all Parameters that I could find and they should be quite reasonably assigned. I hope you find it useful...
Logic ES2 main and useful presets in one page
Made On Remote SL MKII
Page 1 = Controls For Low Band
Page 2 = Controls For Hi Band
Both Pages Contain EQ, Input/Output Gain ,Bypass ,Trigger mode ,Split Freq ,Listen ,Filter Type & Sens
Al located the same on Both Pages
3 pages for Korg iMS-20. No CC's for the sequencer. Hopefully KORG will add CC's later for those knobs :-) UPDATE: CC 111 (Play) is now on every page!Enjoy!
All controls (including hidden parameters) in one page.
I didn't include the mapping for the fx versions, however you can 1) load the corresponding synth map, 2) set it to the fx group and 3) save it and/or set it as default if you like it. ;-)
NobleQ + NobleQex
Covering the all Synthfuntions inkl. delay and reverb. 15 Pages.
From OCS1-4 Filter LFO's and Source/Target Modifications.
Mapping v1.0 for Native Instruments Traktor Scratch Pro 1.2.4 and
Novation 25 SLMKII with Automap Pro 3.4 by StrangeFreak (published on may 6, 2010)
2 Decks, EQ (with kills), Browse, Loops, 2 FX units
On 2 pages in group: mixer (channel 1)
An image of the mapping is included in the zip!
I used the above mentioned soft- and hardware to create this mapping. It should be compatible with all SLMKII's and ReMOTE SL's
The ZeRO SLMKII is a bit of a outsider in this list: the layout at the left side of the board is different from all other models, the mapping was not intended for this different layout and may appear less intuitive. The good part is, the ZeRO SLMKII has a crossfader which all other models lack. For the use of the fader as Traktor's X-fader, assign it to CC#34 in automap.
This mapping comes AS IS. Even to me it is a work-in-progress. I might change the mappings whenever I feel it should be changed. I encourage you to do the same. I created this mapping as a 2-deck mapping, solely because I have a 2-deck DJ-style. If you want a 4-deck mapping, go ahead, create one. Use my mapping as a starting-point if you like!
Note on awkward endless rotator behavior:
The two encoders in the browse-section should have been implemented as endless rotators, but due to the incompatibility between the Automap implementation of increment/decrement and Traktor's relative encoder modes (7Fh/01h or 3Fh/41h) this is currently impossible to do. I settled for the current settings because as long as you turn the rotator clockwise only, it works just the way I want. If you are as fed up with this limited implementation of the endless rotators as I am, send an email to Novation requesting for user defined increment/decrement values for the endless rotators in any future version of automap.
Any suggestions are welcome!
Have fun with this. It's a very good plugin.
Don't give me a bad rating if you didn't even download the mapping. This ain't elementary school.
An in depth sound design based template for Disco DSP's Discovery Mac
WVDB Dblue Glitch v1.3 for Windows.
Made to achieve maximum oversight in a live performance!
10 Pages total (one for each seperate effect)
The first page is dedicated to Main controls like pattern bank change, volume, mainfilter, seed, de-click etc.
Every Page is clearly labelled in the top left row of buttons, one fader per page is only used to set "probability" in random mode. Costumize!
I know it's a bit outdated, but still a nice classic!
Preset for Stylus RMX
All controls on one page.