Redline Equalizer Automap made with Cubase and a Novation SL MKI.
Tried to make this one as intuitive as possible.
Maps almost any parameter of NI Pro53 to SL MKII
1 zipped, 2-pages Automap for Twisted Tools - Buffeater - Reaktor ensemble. It was created with Remote Zero SL and works only in VST mode / not as standalone in Reaktor. Cheers
1 zipped file for Twisted Tools - Vortex - Reaktor ensemble. This 7-pages Automap was created with Remote Zero SL and works only in VST mode / not as standalone in Reaktor. Have fun with it! Greetz
ZeRO MkII MAP FOR MASSIVE
Page 1: Main Parameter (Makro/Filter)
Page 2: Effects and OSC
Page 3: Modulators 5-8
Page 4-7: Envelopes
Page 8: OSC
A very good EQ and its free !
Made a quick mapping for it...
Have fun with this. It's a very good plugin.
Don't give me a bad rating if you didn't even download the mapping. This ain't elementary school.
download corresponding Omnisphere Midi Mapping + Maschine Template under MIDI Templates...
PAGE1: Vol 1-8, Aux1 , Aux3, Solo, Mute
PAGE2: Orb Controls
PAGE3: Filter Cut/Res, Filter On/Off, Master Filter
Page4: some Control for Channel1 LayerA
Page5: Some Controls for Channel1 LayerB
Mapping doesn´t make sense without the Maschine Template and of course the Omnisphere
File, downloadable in Midi-Template Section
WVDB Dblue Glitch v1.3 for Windows.
Made to achieve maximum oversight in a live performance!
10 Pages total (one for each seperate effect)
The first page is dedicated to Main controls like pattern bank change, volume, mainfilter, seed, de-click etc.
Every Page is clearly labelled in the top left row of buttons, one fader per page is only used to set "probability" in random mode. Costumize!
I know it's a bit outdated, but still a nice classic!
17 pages - all controls mapped to my best knowledge.
Pages: Filter + Main, OSC A1, OSC A2, OSC B1, OSC B2, ModEnv 1+2, LFO 1+2, Misc 1A+1B+2A+2B, Arp on 2 pages, Dist, Phaser, Chorus, EQ, Delay, Reverb, Comp.
All 4 OSC pages feature ADSR and Mix A/B/Main on the faders, Part A/B and Solo switches below the faders.
All 17 pages feature all 8 FX on/off switches on the top of the transport buttons for quick access.
All FX Dry/Wet controls (where available) mapped to the 8th fader.
All controls on one page.
Common performance variables mapped to knobs. More static variables mapped to pots.
Common performance variables mapped to knobs. More static variables to pots.
Common performance variables mapped to knobs. More static variables mapped to pots. ADSR, Chorus, and Overdrive on sliders.
3 pages for Korg iMS-20. No CC's for the sequencer. Hopefully KORG will add CC's later for those knobs :-) UPDATE: CC 111 (Play) is now on every page!Enjoy!
I mapped most of the Logic devices to the Nocturn.
Some mapping are very simple (just renamed parameters), others show are new templates and some show a different approach compared to those that were available on the Novation website.
I mapped the most important parameters of this synth across various pages.
Made using version 2.0.2
Majority of controls organized vertically using the left side of the controller.
Knobs and Sliders version.
The simplest on-board delay.
This is my setup for controlling Stylus RMX from a Zero SL MkII.
The setup is created using enable host automation, and uses all 256 available host learns in Stylus RMX. It would be possible to create a more extensive setup using MIDI, but that would mean having MIDI routed to Stylus all the time, which is a pain in logic (unless you get down and dirty with the Environment). So this is an attempt to provide the best controls in a logical manner for everyday and performance use.
There are two files; a ctl_rmx file, which is a template you can load into Stylus (MIDI Learn > Load Template), and the other is the automap file. Make sure that 'MIDI Learn > Ignore Assignments When Loading Multi' is ticked, so that when you load a multi it doesn't clear the template. (For some reason when you load a template into Stylus it appears to clear all the sounds, but a reload of the multi and everything is fine'
Page 1 - Mix control: Level, Pan, Aux1, Mute, Solo and Play for each part
Pages 2-9 - Part Controls - each page contains:
For a single part:
Depth and Rate for Amp, Filter and Pan LFOs
Attack, Release and Depth for Amp and Filter Envs
Cutoff, Resonance, Width, Gain, Filter Type and 24dB
Pitch, Emph, Tone, Sample Start, Reverse
Half and Double controls from Time
Momentary Play, Unmute and Solo buttons
Tone control also from Crossfade slider and Exp. Pedal
For all 8 parts:
Mute, Solo, Play Buttons
Aux1 Reverb Controls:
Room Size, Time, Density, Low Tone, High Tone, Freeze
For all 8 parts:
Level, Aux1 send, Momentary Mute, Momentary Solo, Momentary Play
All play footswitch, global level
If you want to use this as a starting point for your own setup, you can use 'Unlearn Control' in Stylus RMX, followed by 'Enable host automation' to reassign the slot. You can view the full Control Assignments by clicking View > Controls (top left). Then Save your modified template.
I hope someone finds this useful :)
Template for Synapse Audio - Hydra for easy editing
Made with version 3.7 of Automap, on Mac OS X
using a Sl61 MkII
Presets includes both AutoMap as well as VST version,
even though loading any of them should work fine,
besides the annoying warning message stating preset
was not made for the specific version of the plugin.
Due to AutoMap and VST versions working interchangeably
I also believe that this will work on Windows versions,
but this is untested.
For a quick navigation of where to find controls:
* Oscillator section
- Routing is currently restricted to Type A and B, due to limitations in automation parameter)
* Output section including Pitch Bend Range, Polyphony & Glide Type
* Filter Section
* Envelopes section
* Chorus Effect
* Modulation Section
* Bass FX Effect
* Performance Section except Aftertouch
Automap for DCAM-SynthSquad Strobe
Logic ES2 main and useful presets in one page
Usable for manual improvements, because Automap feature is brocken for this!
Complete mapping of the LennarDigital Sylenth1 synthesizer. Including the effects section and arpeggiator. Made for the ReMOTE ZeRO SL MK1.
Single page mapping for the PSP Xenon limiter. Made for the ReMOTE ZeRO SL MK1.
Single page mapping of the excellent free ePiano plugin by Maxim Digital Audio. Made for the ReMOTE ZeRO SL MK1.
Single page mapping for the free s(M)exoscope waveform visualization plugin by Bram from Smartelectronix. Made for the ReMOTE ZeRO SL MK1.
Single page mapping of the native Oxford Limiter by Sonnox. Made for the ReMOTE ZeRO SL MK1. Slider controls are mapped to the pan pots which might be more applicable for a limiter than the stepped endless encoders.
This is just a simple mapping for 2 decks in Torq 2.0 unfortunately Torq doesn't support led feedback but the mapping is simple to remember once you have used it 2 times. It also allows you to trigger the 4 effects in each deck and the kill switches on the mixer for hi med lo. Enjoy it and once I have figgered out a better update I will let all of you know.
Template for Native Instruments "SpaceMaster2" / Reaktor 5 Library Ensemble.
Use Nocturn to control mixer, devices, scenes, clips, master, tempo, etc. It includes python scripts that communicate with Live 8. You don't need to map manually any parameter. Under GPL license. Revision 1 that fix a bug with banks of less of 8 parameters. See also: https://forum.ableton.com/viewtopic.php?f=1&t=122831
LA2A, 1176LN, Space Echo, Plate 140, EMT 250, Helios 69 and many more!
Instant mappings for Ableton Live devices, especially useful with racked devices and the 8 macro knobs.
Read the instructions in the readme. More info here: http://forum.ableton.com/viewtopic.php?f=1&t=92935&start=0&hilit=nocturn...
Three pages, grouped like the synth layout and in order of my personal amount of fiddling with.
Page 1 : Filter, Env, Arp
Page 2 : LFO, OSC
Page 3 : Bender, Arp, tune stuff
Also as a key feature the cross fader filter
Panic and some other buttons reoccurring
A three page setup for Nexus 2. First Page : Performance controls
Second Page : Filter and Amp Env
Third Page : Delay and Reverb
Due to the lack of automation capabilities of Nexus, nothing for the buttons or the LCD controls.
And here we have a mapping for our all time favourite drum machine, the 909 from D16.
I created 9 pages of trigger happy knob fiddling for your techno fun.
Page 1 : Levels and mute for 8 out of 10
Page 2 - 9 : complete controls for all drums including random threshold, plus Main volume in the middle and mute and solo buttons
Enjoy and please give some feedback
This is my attempt to control the bass beast from Spectrasonics.
I focused on performance controls and easy editing.
Spec. tools have no predefined CC IDs, so I included this file too.
You need to load this for every part you want to control.
Page 1 : Main page performance from left to right plus the 4 lower controls on buttons
Page 2 : Filter control and AMP envelope
Page 3 : Filter envelope and 1st Mod. envelope
Page 4 : LFO 1-4 , rate, depth, sync and +
I know its just a start but please try it and give some feedback.
We Came To Kill - Studio layout by Dusty of WCTK.
Top Knobs - Generator editing & Subtractive Synthesis
Bottom Knobs - Sound Modulation Control
First 4 Faders - Amp ADSR
Second 4 Faders - Filter ADSR
X/Y Pad - Cutoff & Mix
The Bass Station gets much more interesting when you ignore the presets and really tweak it.
Just a basic mapping.. I don't really use this synth so I didn't spend any time tuning it for usability. By Dusty of WCTK
Logic's Tape Delay all in one page