nio

Articles

Make sure you have the installed the latest nio installer from here You'll need to wrap the nioFXrack in Plug-In Manager. Then load the nioFXrack (Automap) version. Then if you look in the Automap...
With early versions of the Nio 2|4 firmware it is possible that when launching Nio FX Rack after restarting your computer, distortion is heard on the Nio's inputs. If you are experiencing this issue...
Make sure you close nioFXRack software on your computer. The nio will use signal b (outputted on 3/4) as the "processed" input if the nioFXRack is opened.
This is normal. The Novation logo on the Nio will start flashing when midi messages are received at the midi ports.
The NIO should ideally be used with the USB cable that came in the box with the unit. If you have lost this cable, then please make sure that you use a good quality cable as a replacement. There are...
Input 2 will either be the Jack on the front, or the red Phono on the back of the unit. The Jack is used to Instrument (e.g. guitar or bass) or Mic level inputs. The Phono is used for Line level...