A-Station

Articles

To load soundbank into the A station, you'll first need the following software: If you are on a PC, you'll need MIDI OX ( http://www.midiox.com/ ) If you are on a Mac, you'll need SysEx Libraian (...
The latest OS version for the A-Station is OS2.1.02. To check to see which version of OS is installed in an A-Station, power the A-Station up while holding down the number 3 button. The screen will...
The way to display a stored parameter value is to turn the local control off. This stops the A-Station from responding to its front panel directly. Instead, any changes you make are transmitted as...
This is in three parts. Firstly the factory OS needs to be reloaded and then the sound banks & global data will have to be restored from ROM. Please note that it is unlikely that the factory OS...
This can be found in the appendix of the A Station manual, which can be downloaded from
The local control has been turned off and the A-Station is not being used in a complete midi-loop. Check the second page in the global menu. If this alternates between "Lo" and "of" use the data...
Check the midi clock source (4th page of the global menu). If this is set to "e" for external, ensure that the A-Station is receiving midi clock. Also check that the arp condition is not off (first...
This is not a fault with the A-Station - it is a warning message. The screen is indicating that one of the shift switches has landed in an indeterminate position. Move all the switches on the front...
The A Station is showing Packet Error on the screen to indicate that it has received a packet error during the data transmission. If this happens, the OS will not be uploaded into the A Station flash...
If the vocoder is being used with a microphone double check that the input sensitivity has been switched from "Lo" (the factory default) to "Hi". This is the correct sensitivity for a microphone or...